Using a set of maintenance-free grinding rollers, the equipment has higher operating reliability, ease of maintenance.
Our Products
HCQ Reinforced Raymond roller mill
technical parameter
| Model | Number of rollers | Grinding ring Diameter （mm） | Maximum feeding size （mm） | Fineness（mm） | Capacity(t/h) | Power (kw) |
| HCQ1290 | 3 | 1290 | ≤20 | 0.038-0.18 | 1.5-6 | 125 |
| HCQ1500 | 4 | 1500 | ≤25 | 0.038-0.18 | 2-13 | 238.5 |
Processing
materials
Applicable Materials
Guilin HongCheng grinding mills are suitable for grinding diverse non-metallic mineral materials with Mohs hardness below 7 and moisture below 6%, the final fineness can be adjusted between 60-2500mesh. Applicable materials such as marble, limestone, calcite, feldspar, activated carbon, barite, fluorite, gypsum, clay, graphite, kaolin, wollastonite, quicklime, manganese ore, bentonite, talc, asbestos, mica, clinker, feldspar, quartz, ceramics, bauxite, etc. Please contact us for details.
calcium carbonate
dolomite
limestone
marble
talc
Technical Advantages
The classifier using built-in large blade turbine classifier, the final particle size can be adjusted between 80-400 mesh.
This mill is an reinforced mill based on R-type mill with updated system, more reasonable configuration, and higher throughput rate.
The new large blade allows a large amount of materials to be delivered and ground between the grinding roller and the grinding ring.
Advanced and reasonable layout allows grinding ring to be replaced without disassembling.
The fan using high-pressure centrifugal fan to increase the air volume and pressure, the pneumatic conveying ability has greatly increased.
Product Cases
Designed and built for professionals
- Absolutely no compromise on quality
- Sturdy and durable construction
- Components of highest quality
- Hardened stainless steel, aluminium
- Continuous development and improvement
Structure and Principle
HCM reinforced Raymond roller mill is mainly composed of main mill, feeder, classifier, blower, pipeline device, storage hopper, electric control system, collection system, etc. The main mill including base, central shaft frame, grinding ring, plum blossom frame assembly, grinding roller assembly, central shaft, shovel holder, shovel holder assembly, cover tube and other components.
The raw materials are crushed into the granularity that meets the specifications by the jaw crusher, and the materials enter the main mill cavity for grinding. The ground powders are blown by the airflow to the classifier above the main unit for sieving. The coarse powders will fall into the main unit to be re-ground, the powders that meets the specifications will flow into the cyclone collector with the wind and be discharged through the powder outlet pipe after being collected as the finished powder.
We would like to recommend you the optimal grinding mill model to ensure you get the desired grinding results. Please tell us the following questions:
1.Your raw material?
2.Required fineness(mesh/μm)?
3.Required capacity (t/h)?
