Gabatarwa zuwa Aluminum tama
Aluminum tama za a iya fitar da tattalin arziki na halitta aluminum tama, bauxite ne mafi muhimmanci.Alumina bauxite kuma ana kiranta da bauxite, babban bangaren shine alumina oxide wanda yake da ruwa alumina mai dauke da datti, ma'adinai ne na kasa;fari ko launin toka, yana nunawa da launin ruwan rawaya ko ruwan hoda saboda baƙin ƙarfe ya ƙunshi.Girman shine 3.9 ~ 4g / cm3, taurin 1-3, opaque da gaggautsa;wanda ba a iya narkewa a cikin ruwa, mai narkewa a cikin sulfuric acid da maganin sodium hydroxide.
Aikace-aikacen Aluminum tama
Bauxite yana da wadataccen albarkatu, ana buƙata don masana'antu da yawa;don haka, abu ne mai farin jini da ba na ƙarfe ba, kuma dalilin da ya sa aka yi maraba da shi gabaɗaya, musamman saboda yana da kyakkyawan fata a fagen masana'antu.
1. Aluminum masana'antu.Ana amfani da Bauxite wajen tsaron ƙasa, sararin samaniya, motoci, lantarki, sinadarai da sauran masana'antun yau da kullun.
2. Yin jifa.Calcined bauxite ana sarrafa shi a cikin foda mai kyau don simintin gyare-gyare bayan ƙirar kuma ana amfani dashi a cikin soja, sararin samaniya, sadarwa, kayan aiki, injina da sassan kayan aikin likita.
3. Don samfuran refractory.High calcined bauxite refractoriness iya isa har zuwa 1780 ° C, sinadaran kwanciyar hankali, da kyau jiki Properties.
4. Aluminosilicate refractory zaruruwa.Tare da abũbuwan amfãni da yawa irin su nauyi mai haske, babban juriya na zafin jiki, kyakkyawar kwanciyar hankali na thermal, ƙananan ƙarancin zafi, ƙananan ƙarfin zafi da juriya ga girgizar injiniya da sauransu.Ana iya amfani dashi a cikin ƙarfe da ƙarfe, ƙarfe mara ƙarfe, kayan lantarki, man fetur, sinadarai, sararin samaniya, nukiliya, tsaron ƙasa da sauran masana'antu.
5. Raw material na magnesia da bauxite, wanda aka ƙara tare da mai ɗaure mai dacewa, za a iya amfani da shi don yin amfani da simintin silinda gabaɗaya na narkakken ladle na ƙarfe tare da sakamako mai kyau.
6. Ƙirƙirar ciminti na bauxite, kayan abrasive, nau'i-nau'i daban-daban za a iya yi da aluminum bauxite a cikin masana'antar yumbu da masana'antar sinadarai.
Tsari ya kwarara na Aluminum tama pulverization
Aluminum ore kayan bincike takardar
| Al2O3, SiO2, Fe2O3, TiO2, H2O | S, CaO, MgO, K2O, Na2O, CO2, MnO2, Organic kwayoyin halitta, Carbonaceous da dai sauransu | Ga, Ge, Nb, Ta, TR, Co, Zr, V, P, Cr, Ni da dai sauransu |
| Sama da 95% | Abu na biyu | Bincika kayan abinci |
Aluminum tama foda yin inji samfurin zaɓi shirin
| Ƙayyadaddun bayanai | Zurfafa aiki na lafiya foda (200-400mesh) |
| Shirin zaɓin kayan aiki | Injin niƙa a tsaye da injin niƙa na Raymond |
Analysis a kan nika model
1. Raymond Mill, HC jerin pendulum niƙa niƙa: low zuba jari halin kaka, high iya aiki, low makamashi amfani, kayan aiki kwanciyar hankali, low amo;shine kayan aiki mai kyau don sarrafa kayan aikin aluminum.Amma girman girman girman yana da ɗan ƙaranci idan aka kwatanta da injin niƙa a tsaye.
2.HLM niƙa na tsaye: kayan aiki mai girma, babban ƙarfin aiki, don saduwa da manyan buƙatun samarwa.Samfurin yana da babban matakin sikeli, mafi inganci, amma farashin saka hannun jari ya fi girma.
Mataki na I: Murƙushe albarkatun ƙasa
Babban kayan ƙarfe na Aluminum yana murƙushe shi ta hanyar murƙushewa zuwa ƙimar abinci (15mm-50mm) wanda zai iya shiga injin niƙa.
Mataki na II: Niƙa
Ana aika ƙananan kayan da aka niƙa na Aluminum ɗin zuwa wurin ajiyar ajiya ta lif, sa'an nan kuma aika zuwa ɗakin niƙa na niƙa daidai da adadi ta hanyar mai ciyarwa don niƙa.
Mataki na III: Rarrabawa
Kayan niƙa ana ƙididdige su ta hanyar tsarin ƙididdigewa, kuma foda ɗin da bai cancanta ba ana ƙididdige shi ta hanyar rarrabawa kuma a mayar da shi zuwa babban injin don sake niƙa.
Mataki na V: Tarin samfuran da aka gama
Foda mai daidaitawa da kyau yana gudana ta cikin bututu tare da iskar gas kuma ya shiga mai tara ƙura don rabuwa da tarawa.Ana aika foda da aka gama tattara zuwa silo ɗin da aka gama ta na'urar isarwa ta tashar fitarwa, sannan a shirya ta tankin foda ko fakiti ta atomatik.
Misalai na aikace-aikacen sarrafa tama na aluminum
Model da lambar wannan kayan aiki: 1 sa na HC1300
Mai sarrafa albarkatun kasa: Bauxite
Mafi kyawun: 325 raga D97
Yawan aiki: 8-10t / h
Tsarin kayan aiki: 1 saiti na HC1300
Don samar da foda tare da ƙayyadaddun ƙayyadaddun bayanai, fitowar HC1300 kusan tan 2 ya fi na na'ura na 5R na gargajiya, kuma amfani da makamashi yana da ƙasa.Duk tsarin yana da cikakken atomatik.Ma'aikata kawai suna buƙatar yin aiki a cikin ɗakin kulawa na tsakiya.Aikin yana da sauƙi kuma yana adana farashin aiki.Idan farashin aiki ya yi ƙasa, samfuran za su yi gasa.Bugu da ƙari, duk ƙira, jagorar shigarwa da ƙaddamar da aikin gabaɗaya kyauta ne, kuma mun gamsu sosai.
Lokacin aikawa: Oktoba-22-2021
