HLMKarfe Slag a tsaye MillShuka

Karfe slag niƙa a tsaye ana amfani da shi sosai a cikikarfe slag samar line.HLM Vertical Mill yana iya aiwatar da fineness 75-44μm, idan kuna buƙata karfe slag nika shuka, please contact us for details, Email: hcmkt@hcmilling.com.

Menene karfe slag?

Karfe slag ne babban fitarwa a cikin metallurgical samar tsari, shi ne yafi hada da oxides na alli, da baƙin ƙarfe, silicon, magnesium, da kuma karamin adadin aluminum, manganese, phosphorus, da dai sauransu Babban ma'adinai bulan ne m mafita kafa ta tricalcium. silicate, dicalcium silicate, calcium forsterite, calcium magnesium ya tashi pyroxene, calcium ferric aluminate da oxides na silicon, magnesium, baƙin ƙarfe, manganese da phosphorus.Kuma yana dauke da karamin adadin sinadarin calcium oxide da iron karfe, fluorapatite da sauransu. Abubuwan da ke cikin sassa daban-daban a cikin karfen karfe sun bambanta sosai dangane da irin tanderun karfe, darajar karfe da kuma matakin narkewar kowace makera.

Aikace-aikacen slag karfe

1. Karfe slag yana da high taurin, high lalacewa juriya da lalata juriya, kuma yana da m surface.Ana iya sarrafa shi ta hanyar murkushewa zuwa kusan 15-25mm kuma a yi amfani da shi maimakon tsakuwa don tsakuwar hanya ta hanyoyin jirgin ƙasa, ko ƙaramar hanya.

2. Ƙarfe slag za a iya sanya tukwane da sauran art ayyukan ta hanyar ruwa quenching tsari.

3. Ana iya amfani da slag karfe azaman simintin simintin ƙarfe bayan ƙara gypsum da sauran abubuwan haɓakawa.

4. Karfe slag za a iya amfani da a yi da kuma sauran masana'antu da ake kara wa fashewa tanderu ruwa slag ko gardama ash don saita tubalin, kuma zai iya zama .

 Steel Slag Vertical Mill Production Line, Email: hcmkt@hcmilling.com

Yadda za a sake amfani da slag karfe? - Karfe slag a tsaye niƙa

Akwai yafi hanyoyi biyu don sake amfani da slag karfe.Hanya ɗaya ita ce a sake sarrafa shi a matsayin ƙoshin narkewa a cikin masana'anta, wanda zai iya maye gurbin dutsen farar ƙasa da kuma dawo da ƙarfe mai yawa da sauran abubuwa masu amfani daga gare ta;wata hanyar ita ce a yi amfani da shi a matsayin kayan gini na titi, kayan gini ko danyen takin noma.

Karfe slag niƙa a tsayeAna buƙatar aiwatar da slag ɗin ƙarfe a cikin foda mai kyau, HLM injin niƙa na tsaye zai iya samar da lafiya na 75-44μm, sanannen sanannenkarfe slag a tsaye niƙa wanda ake amfani da shi sosai a duk faɗin duniya.

Ƙayyadaddun ƙayyadaddun kayan aikin ƙarfe na karfe

Karfe slag foda shuka- HLM Vertical Mill

Raw material: karfe slag

Danshi: <15%

Ma'adinai foda takamaiman yanki: ≥420㎡/kg

Danshi samfurin: ≤1%

Yawan aiki: 23-220t/h

Ikon Mota: 900-6700kw

Karfe slag tsaye niƙa abũbuwan amfãni: m ikon amfani, mafi girma nika yadda ya dace, ya fi girma ciyar barbashi size, kasa bene sarari, ƙananan amo, m ƙura, sauƙi na amfani da kiyayewa, kudin-tasiri, low babban birnin kasar zuba jari.da dai sauransu.

Inda zan saya karfe slag niƙa a tsaye?

HCM sananne nekarfe slag samar linemasana'anta, muna samar da injin niƙa na Raymond, niƙa a tsaye, niƙa mafi kyau wanda ke aiwatar da fineness tsakanin 60-2500mesh.Abubuwan da ake amfani da su suna rufe dutsen ƙasa, marmara, bentonite, barite, talc, mica, da sauransu.

Idan kana bukatakarfe slag a tsaye niƙa, ko wasu nau'ikan niƙa, da fatan za a gaya mana waɗannan abubuwan sannan za mu iya ba ku mafi kyawun ƙirar niƙa.

1. Danyen abu.

2. Lalacewar da ake buƙata (ragu) da yawan amfanin ƙasa (t/h) da

Email: hcmkt@hcmilling.com