Da fluoriteRaymond pulverizerkayan niƙa ne na niƙa wanda zai iya niƙa ma'adanai zuwa 80-400 raga foda.Ya ƙunshi yawancin fasahar da aka ba da izini kuma kowane ma'aunin aiki ya inganta sosai, ka'idar aiki na kayan aiki shine kimiyya, injin yana da ingantaccen aiki, babban ƙarfin aiki da ƙarancin kuzari.Hanyoyin fasaha sun haɗa da murkushewa, niƙa, rabuwa da tarin foda.Wani sabon nau'in kayan aikin niƙa ne na Raymond don niƙa foda na fluorite.

HC niƙa Mill

Matsakaicin girman ciyarwa: 25-30mm

Yawan aiki: 1-25/h

Fitowa: 0.18-0.038mm (80-400 raga)

Yaya ake yiinjin niƙa fluoriteaiki?

1. Crushing-Yi amfani da maƙarƙashiya don murkushe tama don saduwa da girman abinci.

2. Nika-ana aika kayan a cikin babban rami na inji don niƙa, ana jefa kayan a tsakanin abin nadi da zoben niƙa, kuma ana samun niƙa da niƙa saboda niƙa na niƙa.

3. Rarraba-Kayan da aka murkushe ana hura shi ta hanyar busa iska zuwa sama mai ƙira don sieving.Idan fineness ya yi yawa, zai fada cikin babban injin don sake yin regrind.

4. Tarin foda-foda tare da ƙayyadaddun ƙayyadaddun ƙayyadaddun za a tattara ta mai tarawa kuma ya zama samfurin da aka gama.

Siffofin Mill

Sabuwar kayan aikin niƙa na Raymond na muhalli ya zama kayan aiki na yau da kullun a cikin foda na ma'adinai da aka yi, kuma kayan aiki ne na ci gaba wanda ke taimakawa wajen cimma babban samarwa da ƙarancin amfani, kariyar muhalli da ceton makamashi, haɓaka samarwa da rage farashi.Mai zuwa yana bayyana fa'idodi da halayen kayan aikin niƙa na Raymond da aka gyara.

(1) Babban shimfidar wuri

Theabin nadi na fluoriteyana amfani da tukwane na furen fure da na'urar niƙa pendulum a tsaye, ingantaccen tsari, ƙaramin injin girgiza, ƙaramar amo, aikin injin yana da ƙarfi, kuma aikin abin dogaro ne.Wani sabon nau'in niƙa ne na Raymond wanda ke gudana lafiya.

(2) Babban ingancin tattara ƙura

Yin amfani da mai tara ƙura mai ƙura mai haƙƙin mallaka, ingancin tarin ƙura ya kai kashi 99% don sarrafawa mara ƙura.

(3) Yawan kayan aiki mai girma

Ƙarfin sarrafawa na kayan kowane lokaci naúrar ya fi girma kuma ingancin ya fi girma.A ƙarƙashin yanayin cewa jimlar ƙarfin injin nau'in nau'in R ya kasance iri ɗaya, ana iya ƙara yawan fitarwa da fiye da 40%, kuma ana iya adana farashin wutar lantarki da naúrar sama da 30%.Yana da manufa high-yi aiki da makamashi-ceton nika kayan aiki.

(4) Mai sauƙin kulawa

Babu buƙatar cire na'urar niƙa don maye gurbin zoben niƙa, wanda ya fi dacewa don kulawa.

Sayi injin niƙa

Muna so mu ba ku shawarar mafi kyawun ƙirar niƙa don tabbatar da samun sakamakon niƙa da ake so.Da fatan za a gaya mana tambayoyi masu zuwa:

1. Kayan albarkatun ku.
2. Lalacewar da ake buƙata ( raga / μm).
3. Ƙarfin da ake buƙata (t/h).

Imel:hcmkt@hcmilling.com